weinor BiLine Combio-868 MVLED - Disposal; Technical Data

Assembly and installation instructions
Item number 116692-0000
We reserve the right to make technical
changes
Version 2
15.11.2013
Page 13/28
BiLine Combio-868 MVLED/ MLED
Technical data 8
Power supply
230 V
Frequency
50 HZ
Maximum power input of motor 250 W
Certified for Becker R30/17C PS(+), R40/17C PS(+),
50/11C PS(+)
Maximum power input of light
32 W;
at least. 1 – max. 11 LEDs, weinor system; max. 680 mA
IP code
IP 54
Permissible ambient temperature
20 to +80°C
Radio frequency 868.3 MHz
Radio protocol
WeiTronic/Elero/Griesser
Supply line
AMP male connector, 2-pole with earthing cable and ring-
type terminal for 6 m cable with safety plug
Awning motor input
AMP female connector, 4-pole
Blue – black – brown – green/yellow
Motor input for Valance Plus
(MVLED only)
AMP female connector, 4-pole
Blue – black – brown – green/yellow
Light connection
Female push-on connector, 2.8 mm (red/black)
Awning switching method
Awning runs on self-sustaining power until end position is
recognised;
coordinated operating mode with retraction protection (MVL
only)
Light switching mode
Light on/off
Dimming of light
Compatibility
• WeiTronic BiEasy hand transmitter
(bidirectional only)
• WeiTronic Remoto hand transmitter (unidirectional only)
• WeiTronic BiLine wall transmitter UniTec-868
• WeiTronic BiLine Agido-868 product protection sensor
• WeiTronic BiLine Sensero-868 AC Plus sun/ wind/ rain
sensor
• WeiTronic BiLine Aero-868 AC 230 sun/ wind sensor
• WeiTronic BiLine Aero-868 Solar sun/ wind sensor
• WeiTronic BiLine Lumero-868 sun sensor
Disposal 9
Do not dispose of used or defective electrical or electronic devices in household waste. They must
be returned to the manufacturer or taken to a local collection point.
Instructions de montage et d'installation