Need help?Do you have a question about the Weishaupt WTC-GB 15-B Compact and is the answer not in the manual?
Manual intended for operator and qualified personnel. Work must be done by trained personnel.
Explanation of danger, warning, caution, and information symbols used in the manual.
Exclusion of guarantee/liability for damage due to improper use or non-original parts.
Specifies suitable applications and conditions for the unit and storage tank.
Actions to take if gas is smelled to prevent fire and explosion.
Steps to follow if flue gas is detected to ensure safety.
General safety precautions for operation and maintenance of components.
Explanation of model coding and locating the serial number.
Details on water, electrical, safety, combustion control, and program sequence.
Description of how the fresh water storage tank heats water via heat exchangers.
Detailed technical specifications including approval, electrical, ambient, fuels, and rating data.
Requirements for installation location and operating pressure according to Swiss regulations.
Steps for removing transport protection, front panel, and installing the storage tank.
Guidelines for heating water quality, pH, hardness, and treatment.
Instructions for hydraulic, gas supply, condensate, air/flue gas, and electrical connections.
Steps for mounting the unit and installing air supply/flue gas ducting.
Overview of operational display, controls, and status indicators.
Managing favourite settings and navigating the user level for parameter adjustments.
Configuring system modes, heating circuits, domestic hot water, and settings.
Advanced operations for WTC, combustion, hydraulics, service, and commissioning menus.
Ensuring installation readiness, gas valve soundness, and connection pressure.
Step-by-step guide for initial setup using the commissioning wizard.
Checking flue gas system soundness and adjusting unit capacity.
Formulas and steps for calculating combustion heat rating.
Notes on servicing, component lifespans, and procedures for burner and heat exchanger.
Notes, service plan, and procedures for cleaning and maintaining the fresh water storage tank.
General steps for diagnosing and rectifying fault conditions, including warnings and faults.
List of warning codes, their causes, and recommended rectification procedures.
List of fault codes, their causes, and recommended rectification procedures for qualified personnel.
Troubleshooting guide for common operating issues related to the condensing boiler and fresh water storage.
Information on the externally powered anode, its function, risks, and servicing.
Description of different hydraulic configurations (KI, KP) and their components.
Details on control modes, remote access, circulation pumps, inputs/outputs, and factory settings.
Factory settings for heating circuit types, time programs, and heating curves.
Wiring diagrams for WEM-FA-G and sensor resistance tables.
Guidance on calculating required expansion vessel volume and setting system pressure.
Overview of the WEM system, including system device, extension modules, and room devices/sensors.
To Next Page
General
