GENERAL USE AND SAFETY INFORMATION
Thank you for purchasing this quality 2400w Surface Mount Space Heater product by Weiss.
With a Weiss 2400w Surface Mount Space Heater you will be able to provide controlled warmth into the installed
location in your home.
NOTE: THESE UPDATED INSTALLATION AND OPERATION INSTRUCTIONS SUPERSEDE ANY INSTRUCTIONS ON THE
CARTON or other FITTING INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE COMMENCING INSTALLATION.
Note: Pictures and diagrams on packaging are designed only to be used as a concept. All installation details
should be carried out as per the instructions herein.
Note: THIS PRODUCT MUST BE WIRED BY A REGISTERED ELECTRICIAN
SUITABILITY
2400w Surface Mount Space Heater can be installed into any rooms that require warmth to ward off winter chills.
The subtle design and quiet operation make the unit suitable for hallways, bedrooms and other family areas. Not
for use in kitchens and bathrooms.
BEFORE YOU START
2400w Surface Mount Space Heater must not be mounted in areas subject to direct splashing. Refer to New
Zealand standard NZECP2: 1988 Section 4.6 and Australian Standard AS3000:1991, Section 6.2.
SAFETY NOTE
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
To avoid a hazard, a damaged supply cord must be replaced by the manufacturer. This includes the removal of
the supply cord as this appliance is supplied as compliant. Modification including removal of the plug or cutting
of the supply cord will render unit NON-COMPLIANT.
• Use this appliance only with the voltage specified on rating label.
• Do NOT use this appliance other than for its intended use.
• Do NOT touch hot surfaces or moving parts.
• Do NOT cover the grilles or place any object or material up against the unit, as this may block entry or
exhaust of airflow.
• Do NOT probe any opening to remove fluff. To ensure trouble-free performance it is recommended that
every 3 months the unit be isolated from the power supply and a vacuum cleaner used to remove dust
and fluff from the inlet and outlet grilles.
• Do NOT allow the supply cord to come into contact with heated surfaces during operation.
• If used in conjunction with another heater fitted with an electronic programmer, ensure that the heater
can operate safely in accordance with these operational instructions.
• Regulations require that electrical work be carried out by authorised persons. For your own safety and
that of others, ensure this is done.
• This appliance is not intended for use in wet areas, i.e. bathrooms/laundries.
INSTALLATION INFORMATION
CAUTION
If the heater is used on the Freeze Guard setting, or operated via a timer, ensure the heater is not obstructed in
any way by furniture or drapes etc.
Ensure the heater can operate safely, should the heater switch on when the ambient temperature drops,
or if Freeze guard activates the heater.
IMPORTANT
When operated for the first time, the heater may emit a slight odour. This is normal, and should clear within a few
minutes. It is recommended you open windows and doors during this process.
Removing the front cover:
WARNING: always ensure the power supply is switched off or disconnected when the front cover is off
Unscrew the locking screws on each side of the front fascia and lift the assembly out and up from the unit.
ADDITIONAL PRODUCT NOTES
To Next Page
Loading...