The WelBilt 36 LED Solar Security Light is an outdoor lighting solution designed to provide illumination and enhance security through motion detection. This device operates on solar power, making it an energy-efficient and environmentally friendly option for various outdoor settings.
Function Description:
The primary function of the WelBilt 36 LED Solar Security Light is to automatically illuminate an area when motion is detected, providing temporary light for security or convenience. It utilizes a solar panel to charge internal batteries during the day, and a 36-super bright LED floodlight to emit light at night. A motion sensor triggers the light, which then stays on for 30 seconds if no further motion is detected. The system is designed to function when the photo-sensor detects minimal ambient light, ensuring it only operates in low-light conditions.
Important Technical Specifications:
- Light Source: 36 Super Bright LEDs
- Power Source: Amorphous Solar Panel
- Battery Type: 3 x 1.2V 600mAh Ni-Cd rechargeable batteries
- Solar Panel Wire Length: 16 ft (maximum distance between lamp head and solar panel)
- Motion Sensor Range: Over 16 ft (5m)
- Motion Sensor Angle: 45-60 degrees (vertical), 90-120 degrees (horizontal)
- Illumination Duration: 30 seconds per motion detection
- Recommended Mounting Height for Lamp Head: 6.5 – 9.8 ft from the ground
Usage Features:
- Solar-Powered Operation: The device is powered by an amorphous solar panel, eliminating the need for external wiring or electricity, and reducing operating costs.
- Motion Detection: Equipped with a motion sensor, the light automatically turns on when movement is detected within its range, providing on-demand illumination.
- Adjustable Solar Panel: The solar panel can be adjusted to ensure it receives maximum sunlight exposure throughout the day, optimizing charging efficiency.
- Flexible Installation: The solar panel and lamp head are separate units connected by a 16 ft wire, allowing for flexible placement. The solar panel can be wall or deck mounted in an area with optimal sunlight, while the lamp head can be mounted in the desired illumination area.
- On/Off Switch: A switch located on the side of the lamp head allows users to manually turn the light "On" for automatic operation or "Off" to disable motion detection and keep the light off.
- Initial Charging Recommendation: For optimal performance, the unit should be charged for at least 3 days with the switch in the 'Off' position prior to initial use. This ensures the batteries are fully charged for maximum illumination and longevity.
- Automatic Operation: Once the switch is in the 'On' position, the light will automatically turn on when motion is detected in low-light conditions.
Maintenance Features:
- Cleaning: The lamp and solar panel should be kept clean to optimize performance. Solar cells should be cleaned with a damp towel, avoiding excessive pressure, solvents, or harsh cleaning agents.
- Battery Replacement: The device uses rechargeable Ni-Cd batteries (3 x 1.2V 600mAh). These batteries are accessible by removing screws from the front of the battery housing, located in the back of the lamp head. Batteries should be replaced with rechargeable batteries of the same type and rating.
- Battery Lifespan: Rechargeable batteries may last up to 800 charges. For best performance, it is recommended to replace batteries every 12 months.
- Troubleshooting: The manual provides troubleshooting steps for common issues, such as the light not illuminating. These steps include ensuring the solar panel receives maximum sunlight, the lamp head is away from other light sources, the solar cells are clean, the switch is 'On', batteries are correctly installed, and allowing sufficient initial charging time.
The WelBilt 36 LED Solar Security Light is designed for ease of installation and maintenance, providing a reliable and efficient security lighting solution for various outdoor applications.
To Next Page
Need help?
General
