Welch Allyn 6000 Series - Tests Performed by Service Tool

Remove the front housing
Remove the following:
1. Rear housing. For details, see “Remove the rear housing.”
2. Bottom housing. For details, see “Remove the bottom housing.”
3. Top housing. For details, see “Remove the top housing.”
4. Light bar. For details, see “Remove the light bar.”
5. Temperature module and mounting cover. For details, see “Remove the temperature module or
housing.”
6. Main board. For details, see “Remove the main board.”
7. LCD display. For details, see “Remove the LCD display.”
8. Remove the remaining strut.
When replacing the front housing
For models with the temperature option, replace the thermal shield (45).
Service manual Disassembly and repair 79