10 Introduction Welch Allyn AED 10 Automatic External Defibrillator
Overview
The Welch Allyn AED 10 (automated external defibrillator) is a safe, easy-to-use
defibrillation device. The unit is lightweight and mobile and can be used in situations
where there could be several minutes before the arrival of advanced life support (ALS)
personnel.
The Welch Allyn AED 10 recognizes ventricular fibrillation and other ventricular tachycardia
and guides operators through the defibrillation process. When properly connected to a
patient who is unconscious, not breathing, and unresponsive (without signs of
circulation), the Welch Allyn AED 10 analyzes the patient’s heart rhythm, provides text and
audio instruction prompts, determines if a shockable situation exists, and, if appropriate,
automatically arms the Shock button.
The Welch Allyn AED 10 delivers the defibrillation shock through two self-adhesive, pre-
gelled, low-impedance electrode defibrillator pads. The pads, cable, and connector are
sold as disposable kits.
Features
• Two-button operation
• Extensive voice and visual prompts for the operator
• Continuous event recording for reporting each use to a printer or computer
• Weekly self-test to ensure readiness
• Biphasic energy output
• Lock-out protection to prevent inadvertent defibrillation
• Continuous surveillance of battery level
Qualified Operators
The Welch Allyn AED 10 permits trained users to administer a brief electrical shock to
patients experiencing fibrillation or sudden cardiac arrest (SCA).
A qualified operator is someone who has successfully completed a CPR AED training
course (e.g., AHA Heartsaver course or equivalent course provided by an accredited
organization).
Note
Although this User Manual refers to only the AED 10 automated external
defibrillator, the manual describes the operation of both the AED 10 and the
JumpStart automated external defibrillators configured with the software
indicated on the front of this manual.
To Next Page
Loading...