4. Clean the metal electrical contacts on the device dock with the cotton swab.
5. Allow the contacts to air dry for 1 minute.
6. Return the Braun thermometer to the dock.
Decontamination and cleaning requirements for returns
As a general safety precaution, the monitor must undergo decontamination before being
returned to Welch Allyn for service, repair, inspection, or disposal. Cleaning is an
essential prerequisite for effective disinfection or decontamination. Follow the cleaning
instructions presented earlier in this section.
Note Contaminated items must not be returned without prior, written
agreement.
Note Decontaminate the monitor according to your facility’s procedures and local
regulations.
Service manual Cleaning requirements 97
To Next Page
Loading...
