Welch Allyn Connex Spot Monitor - Standard Unlicensed Edition Service Tool Tests Performed; Gold Edition Service Tool Tests Performed

Standard unlicensed edition service tool tests performed
The service tool performs the following functions on the host device and installed
options.
Test Description NIBP Temp SpO2 Host APM
Reads firmware Displays the firmware version
Firmware upgrade Loads the latest firmware into the module
Leak test Verifies leaks using 100 cc volume
Accuracy test (NIBP) Checks the accuracy of transducers across the
pressure range
Overpressure test Verifies the maximum cuff pressure for adults
and neonates
Charge LED Verifies the LED
Bin light Verifies on/off light
Gold edition service tool tests performed
The service tool tests the host device and installed options as listed in the following
table.
Test Description NIBP Temp SpO2 Host APM
POST Performs the power-on self test (POST)¹
Firmware version Checks the firmware version
Firmware upgrade Loads the latest firmware into the module
Leak Verifies leaks using 100 cc volume
AD noise Checks noise on the pressure channel
Calibration Calibrates pressure transducers
Accuracy (NIBP) Checks the accuracy of transducers across the
pressure range
Dump Checks dump valves
Pump inflation Verifies the pneumatic pump
Overpressure Verifies pump limits
104
Functional verification and calibration overview Connex
®
Spot Monitor