Bluetooth
®
messages
Message Possible cause Suggested action
Alarm
priority
Bluetooth connection
failure. 370201
The monitor failed to connect to
the Bluetooth device.
Verify a successful pairing of the device
with the PC. If the problem is still present,
verify the EMR and the patient window are
running. If the problem is still present,
verify the Bluetooth device signal strength.
If the problem is still present, verify the PC
hardware and configuration. If the problem
is still present, verify the Bluetooth device
hardware.
Very low
Bluetooth not functional.
370001
The monitor detected a Bluetooth
device that is not functional
Reboot the monitor. If the problem persists,
replace the Bluetooth radio. If the problem
persists, replace the main PCBA.
Very low
Bluetooth not functional.
370002
The monitor cannot detect a
Bluetooth module
Replace the Bluetooth radio. If the problem
persists, replace the main PCBA.
Very low
N/A The Bluetooth device failed to pair
with the monitor.
Verify a successful pairing between the
device and the PC. If the problem is still
present, verify the Bluetooth signal
strength. If the problem persists, verify
authentication code, verify the computer
hardware and configuration. If the problem
persists, verify if the computer has prior
pairing information for the monitor.
Very low
N/A The Bluetooth device failed to pair
with the monitor.
Version of stack on the PC does not support
simple secure pairing. The device requires
2.1+EDR Bluetooth stack on the host PC.
Very low
Bluetooth device
connection successful
The Bluetooth device connected None. Information
N/A The Bluetooth device did not
connect with the monitor
BT device connection dropped due to
distance, application crash on host end.
OR
RF connection not possible
OR
RF connection possible, but cannot find
device
OR
BT connection was established, but WACP
connection not possible
N/A
Bluetooth device
disconnected
The Bluetooth disconnected None. Information
Service manual Appendix 199
To Next Page
Loading...
