Radio status
In Advanced settings, touch the Service > Radio status tabs. This Radio status vertical
tab displays the following read-only data about the WiFi or Bluetooth radio connection:
Network
• MAC address
• IP address
• Subnet mask
• Gateway
• DHCP server
• DHCP lease time
Network statistics
• Rx bytes
• Tx bytes
• Rx packets
• Tx packets
• Rx multicast packets
Errors
• Rx errors
• Tx errors
• Rx packets dropped
• Tx packets dropped
Radio settings
• Version
• Radio status string
• SSID
• Access point MAC
• Authentication type
• RSSI
• Radio band
• Channel
• Power mode
• FIPS mode
If the device cannot communicate with the radio through the internal radio IP address,
the radio error 35002c appears. A Mac address text field appears on the Radio status tab
approximately three to four minutes after the error message. Contact Welch Allyn for
assistance in entering the correct Mac address in this field.
Enter general device information
1. In Advanced settings, touch the Service > General tabs.
32
Advanced settings Connex
®
Spot Monitor
To Next Page
Loading...
