Service Kit
Number
Material
Number
Description
13 105936 Srv Kit CSM, Newmar Radio PCBA
14 105937 Srv Kit CSM, Bluetooth Radio PCBA
15 105926 Srv Kit CSM, Masimo SpO2 Insert
16 105927 Srv Kit CSM, Nellcor SpO2 Insert
17 105928 Srv Kit CSM, No SpO2 Insert
18 105929 Srv Kit CSM, Nonin SpO2 Insert
19 105924 Srv Kit CSM, LCD with Touchscreen
20 105922 Srv Kit CSM, LCD Bezel
21 105921 Srv Kit CSM, Front Housing
22 105944 SRV Kit CSM, Power Switch
23 105941 Srv Kit CSM, Braun ThermoScanPRO 6000 Module
24 105940 Srv Kit CSM, Sure Temp Plus Module
25 105943 SRV Kit CSM, APM Work Surface
26 Batt99 9 CELL LITHIUM ION BAT SINGLE PACK
27 105972 SRV Kit CSM, APM Work Surface, Battery Door
28 7000-PS Connex Spot 35 Watt Power Supply
* Not available for direct purchase.
About 3rd Edition service kits
The tables describes the components of the device and APM and the associated service
kits for replaceable parts for devices manufactured per IEC60601-1 3rd Edition from
2015 through 2018. To determine which year your device was manufactured in, refer to
the serial number. The year of manufacture is listed as the last two digits of the serial
number.
Future revisions of a part might not always be backwards compatible with a legacy part.
To determine the correct replacement part for your unit, always provide the serial
number and model when ordering.
To repair a 3rd edition device component, you might need to use a service kit to upgrade
the component. To determine whether you need to use an upgrade kit to replace a
component for the first failure, consult the 3rd edition service kits for the first
component failure table to locate the correct service kit to use with your device.
Note Upgrading a component does not make the device 4th edition compliant.
88
Field replaceable units Connex
®
Spot Monitor
To Next Page
Loading...
