Note In the Continuous Monitoring profile, the Send option is not available on the
Review tab.
Manage patient records (Intervals Monitoring, Spot
Check, and Office profiles)
Patient records can be sent to the network, printed, or deleted in these profiles.
1. Touch the Review tab.
Note Measurements that trigger a physiological alarm are
highlighted on this tab.
2. Select records by touching the check box.
3. Touch Send to transmit the records to the network, Print to print the records, or
Delete to permanently remove the records as desired.
CAUTION Verify patient identity on the monitor after
manual or barcode entry and before printing or transferring
patient records.
CAUTION Always visually verify the printed patient records.
Note The icon indicates the records have been sent to the
network.
Note You can configure some profiles and settings to
automatically send measurements to the network.
Note Patient measurements older than 24 hours are automatically
deleted from the Review tab.
Note The date and time stamps on saved patient measurements
adjust in response to new date and time settings.
Directions for use Patient data management 97
To Next Page
Loading...
