SpO2
The SpO2 sensor measures oxygen saturation and pulse rate. Oxygen saturation is
displayed as a percentage from zero (0) to 100%. The oxygen saturation and pulse rate
are updated and refreshed each second, ± 0.5 seconds.
SpO2 frame
The SpO2 frame displays data and controls used in pulse oximetry measurements.
The frame provides a numeric view and a waveform view of SpO2 data. You can toggle
between views by touching the left side of the frame.
SpO2 numeric view
The numeric view indicates the SpO2 saturation percentage and the pulse amplitude.
Features of this view differ based on the type of sensor enabled and the profile selected.
The size of the SpO2 frame and displayed measurements varies based on your
configuration.
Nellcor sensor
Intervals Monitoring and Continuous Monitoring profiles Spot Check profile
Masimo sensor
Intervals Monitoring profile, no SpHb license
Spot Check profile
Intervals Monitoring profile, SpHb license activated
Directions for use Patient monitoring 163
To Next Page
Loading...
