Welch Allyn Connex VSM 6000 series - Parameters

The General tab appears.
2. Touch the General tab.
3. Touch the Demo tab.
4. Specify settings.
Setting Action/Description
Type Select a type of demonstration mode.
Start Touch Start to put the monitor in demonstration mode.
Navigate to the Home tab to begin Demo mode.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Demo mode, touch Exit on the Home tab. The monitor restarts
automatically.
Parameters
Specify advanced IPI settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab will appear.
2. Touch the Parameters tab.
3. Touch the IPI tab.
4. Specify settings.
Setting Action/Description
Display IPI Select to display the IPI frame on the Home tab.
Default view Select a numeric view or trend graph view as the primary
IPI display on the Home tab.
Trend period default Select a default time period for the trend graph display
of IPI.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify advanced RRa settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
192 Advanced settings Welch Allyn Connex
®
Devices