EasyManua.ls Logo

Welch Allyn Connex VSM 6000 series - Environmental Specifications; Device Radio; Configuration Options; Vital Signs Monitor 6000 Series

Welch Allyn Connex VSM 6000 series
266 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Environmental specifications
Operating temperature 50°F to 104°F (10°C to 40°C)
Transport/storage temperature -4°F to 122°F (-20°C to 50°C)
Operating altitude -557 to 10,000 ft. (-170 m to 3,048 m)
Operating humidity 15 to 95% noncondensing
Transport/storage humidity 15% to 95% noncondensing
Device radio
The device's radio operates on 802.11 networks. For information regarding the
configuration of network connections and recommended settings, see the best practices
documents at www.welchallyn.com/promotions/
Network_Installation_Best_Practices.htm.
Wireless network interface
IEEE 802.11 b/g, 802.11a
Frequency
802.11 b/g: 2.402 GHz to 2.4835 GHz
802.11a: 5.125 GHz to 5.875 GHz
Channels
Up to 14 in 802.11b/g, up to 24 in 802.11a; country-dependent
Security/encryption/authentication
WPA2/AES (either EAP or PSK authentication)
Antenna
Internal multiband PIFA
Wireless data rates
802.11b: 1Mbps or higher during vitals transmission only
802.11a/g: 6Mbps or higher during vitals transmission only
(approximately 2 seconds per reading)
Protocols
UDP, DHCP, TCP/IP
Data transfer protocols
UDP, TCP/IP
Modulation
OFDM (802.11a/g), DSSS/CCK (802.11b)
Output power
40mW typical, country-dependent
Ancillary IEEE standards
802.11e, 802.11h, 802.11i, 802.11X
Configuration options
Vital Signs Monitor 6000 Series
The monitor is available in multiple configurations.
236
Specifications Welch Allyn Connex
®
Devices

Table of Contents

Other manuals for Welch Allyn Connex VSM 6000 series

Related product manuals