Handle module assembly (Integrated Wall System only)
Handles supply power to Welch Allyn 3.5V instruments.
Contraindications
This system (all configurations) is not intended to be used:
• on patients connected to heart/lung machines
• on patients being transported outside a healthcare facility
• within the controlled access area of MRI equipment
• in a hyperbaric chamber
• in the presence of flammable anesthetics
For contraindications of SpO2 and SpHb sensors, consult the sensor manufacturer's
directions for use.
Systems configured with EarlySense are not intended to be used:
• on patients for whom proper positioning cannot be achieved or maintained
• on patients who do not meet the weight limits tested or specified
Directions for use Introduction 3
To Next Page
Loading...
