9. Highlight the device software (for example, the firmware Host Controller 2.XX.XX) to
choose it from the list.
The device's current software (firmware) version shows in the Device firmware
column and the latest available version shows in the Available firmware column.
10. Click Upgrade all. Optional, click Read release notes to view upgrade details.
11. At the Upgrade Host Controller screen, click Yes at the prompt: Do you want to
continue?
CAUTION Do not power off the CP 150 device during the
update.
Note The upgrade process may take up to fifteen minutes to cycle
through the complete upgrade. During the upgrade process,
the progress indicator shows the percentage complete
status, however, it is also normal to see both a blank screen
and a reboot screen that appear several times before the CP
150 device automatically reboots.
Activate the DICOM license through the Welch Allyn
Service Tool
Note A USB cable is required to perform the DICOM upgrade.
Note Contact Welch Allyn to purchase the DICOM license. DICOM installation
requires a DICOM license that needs to be authorized through the Welch
Allyn Service Tool. When you purchase a licensed upgrade or option for a
supported product, you also receive an authorization code from Welch
Allyn. Use this code to activate the new feature or features.
Service manual Service 41
To Next Page
Loading...
