6. Insert a USB flash drive containing the latest software into a USB port on the back of
the device and touch Update. “Update complete. Press OK to reboot.” appears
after the update is complete.
7. Touch OK.
The device automatically reboots.
Note Do NOT remove the USB drive or AC power from the device
during reboot.
8. Remove the USB drive from the CP 150 after the reboot completes.
To verify the software version:
• Touch the Settings tab.
• Touch the Advanced tab. The software version appears on the Advanced Tab screen
• Verify that the correct software version is listed for the CP 150. You are ready to use
the updated software.
Service manual Service 49
To Next Page
Loading...
