CP 20_______________________________________________________________________Section 2
Select number 3 (Set Time/Date) from the Application menu.
The preprogrammed date and time is displayed for the CP 20. To make changes, type in the
desired date and time values (using a 24-hour clock) in the same format as displayed. Use (F1)
and (F2) to move back and forth through each row.
TIP: Use the BACKSPACE
key to erase entry errors
Select Save (F5) to save changes before exiting.
Select Exit (F6) to return to Real-Time ECG View.
If you did not save before selecting Exit, any changes made to the Time/Date will be lost.
NOTE: LCD contrast can be adjusted by selecting Lcd
c
(F3) or Lcd
d
(F4).
TIP: The battery voltage value is displayed at the bottom of this screen.
2-4
To Next Page
Loading...
