CP 20_______________________________________________________________________Section 5
record, based on its size, in order to make room for the new ECG. Only those records that have been marked for
deletion will be removed. Records are automatically marked for deletion based on the Delete Rule in the
configuration. To manually mark an ECG record for deletion, press Delet (F4) and an “X” will appear. To remove
the delete status, select F4 again.
NOTE: Only when the directory becomes full, ECGs that are marked for deletion are
automatically removed from the directory based on their record size to make room
necessary for the new ECG record.
TIP: Use the delete rule in the configuration settings to automatically define the ECG
delete status. (See section 3).
NOTE: Record status symbols: X =deleted, P = printed, T=transmitted. When the
directory is sorted by ID and Date status symbols are displayed on the top row of the
LCD. If sorted by Name, symbols are displayed on the right hand column as pictured
below.
To view a specific ECG record, highlight the desired name from the directory list and press Selec (F3). The
selected patient’s ECG is presented in Acquired ECG View with the same functions available as previously
described. For example, access the patient demographics screen by selecting ID (F1) to change or add patient
information. Toggle through the available Acquired ECG View waveform formats by selecting Fmt (F2) and Gain
(F3). To make an additional copy of the ECG, select Copy (F4).
Patient Directory
(sorted by name)
Acquired ECG View
Note: to return to the Patient Directory, select Exit (F6) from the Acquired ECG View.
To manipulate the print format of the acquired ECG, regardless of the plot format configuration setting, select Fmt
(F2). Select the appropriate format (F1-F5) to return to the Acquired ECG View.
Acquired ECG View
Plot Format FMT (F2)
5-3
To Next Page
Loading...
