CP20_____________________________________________________________________________
Select F2 (+GCI=) to populate the prefix “AT+GCI” of the modem command.
TIP: “AT+GCI” will be highlighted – cursor is not present – use keypad to enter country code.
Enter your country code as listed below. Select F1 (Send) to change your country code. “Command stored” will be
displayed. Select F6 (Exit) to return to the Application Menu.
Country Code Country Code
Australia 09 Luxembourg 69
Austria 0A Japan 00
Barbados 0E Korea 61
Belgium 0F Malaysia 6C
Canada 20 Netherlands 7B
Czech Republic 2E New Zealand 7E
China 26 Norway 82
Denmark 31 Poland 8A
Finland 3C Portugal 8B
France 3D Republic of Slovakia 2E
Germany 04 South Africa 9F
Greece 46 Singapore 9C
Guam 48 Spain A0
Hungary 51 Sweden A5
Hong Kong 50 Switzerland A6
Iceland 52 Taiwan FE
Indonesia 54 Thailand A9
Ireland 57 United Kingdom B4
Italy 59 United States B5
A-4
To Next Page
Loading...
