Directions for Use Chapter 4 Reviewing the ECG Settings 43
Reviewing the Interpretation and Copy Settings for Auto Reports
1. Press the Menu key .
2. Choose ECG Settings > Edit Auto Report 1 (or 2) > Interp Settings.
The following screen appears.
Figure 27. “Interpretation Settings” Screen
3. Change any desired settings.
For a report example, see
Figure 25 on page 39.
Setting Description
Print Interpretation? On or off. Determines whether interpretation is printed and saved with reports.
Copies Number of copies to print automatically in addition to the original report:
0, 1, 2, 3, 4, or 5.
Copies With Interp On or off. Determines whether interpretation is printed on the automatic copies.
Reason Statements On or off. Determines whether reasons (criteria) are printed with the interpretation
statements.
Unconfirmed Report On or off. Determines whether the label “Unconfirmed Report” is printed on reports.
Abnormal ECG On or off. Determines whether the label “Abnormal ECG” is printed on reports.
Available only for systems using automatic interpretation.
Interp Settings
1 Print Interpretation?
2 Copies
3 Copies With Interp
4 Reason Statements
5 Unconfirmed Report
6 Abnormal ECG
0 Previous Menu
9:17AM Oct 16 08
To Next Page
Loading...
