Directions for Use Chapter 4 Reviewing the ECG Settings 47
Reviewing the Rhythm Report Settings
1. Press the Menu key .
2. Choose ECG Settings > Rhythm Report Settings.
The following screen appears.
Figure 30. ”Rhythm Report Settings” Menu
3. Change any desired settings.
Setting Description
Lead Arrangement Choose the number of leads you want to print at a time: 3, 6, or 12.
For instructions on cycling through 3-lead or 6-lead groupings while printing a rhythm
report, see
Step 2 on page 63.
Default Rhythm Speed Choose the default rhythm speed: 10, 25, or 50 mm/s.
Standard Lead Order Configure the order in which leads appear during rhythm printing when the standard
lead set is in use.
Augmented Lead Order Configure the order in which leads appear during rhythm printing when the
augmented pediatric lead set is in use. For electrode placement locations, see
Figure 33 on page 54.
Rhythm Report Settings
9:17AM Oct 16 08
1 Lead Arrangement
2 Default Rhythm Speed
3 Standard Lead Order
4 Augmented Lead Order
0 Previous Menu
To Next Page
Loading...
