Welch Allyn CP 200 - Recalling Saved Patient Data

64 Chapter 5 Performing ECG Tests Welch Allyn CP 200 Electrocardiograph
Recalling Saved Patient Data
During an ECG or spirometry test, instead of entering patient data manually you can recall
saved patient data in either of two ways:
• Search by entering a patient’s name or ID.
See
“To Search by Entering a Patient’s Name or ID” on page 65.
• Choose a patient from the scheduled patients list.
See
“To Choose a Patient from the Scheduled Patients List” on page 67.
The following diagram illustrates the procedure for both types of data recall.
Figure 42. Patient Data Recall, Process Diagram
Proceed with ECG or
spirometry test.
Press
Search.
Go to
Enter New Patient
screen.
Press
Schedule.
Enter patient’s
last name or ID.
Choose a patient.
Patient data is filled in on the screen.