Welch Allyn GSI 38 - Audiometer SPL Output Level Calibration

8
8
‘..
NTERING THE CALIBRATION MODE DIRECTLY (ROUTINE CALIBRATION)
!
1)
Verify that Dip Switches 6, 7, and 8 are in the OFF position.
2)
Power up the unit.
L
3)
Slide the Cal/Normal Switch to the Cal Mode position. The display should
appear as follows:
7
L
CALIBRATION MODES
L
L
c
i
l ATTEN MAX CAL
PRINT HEAD CAL
XDUCER
STIM CAL
CUSTOM RTL CAL
PROBE TONE/MIC CAL
COMPLIANCE CAL
PRESSURE CAL
38