I
1
I
i
L
1
i
L
L
L
1
t
L
Code Number
Description/Probable Cause
25
Remote Record received with a Bad Record Format, invalid
Key Code, or Invalid Record Type
/
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
EEPROM Checksum Error
/
EPROM TO EEPROM Data Load Error
/
Remote Command received from an external remote device
(factory auto
cal)
which is invalid due to mode or is an
unsupported record type
/
Remote command received from an external remote device
(factory auto cal) which is ignored due to mode
/
GSI vs Custom RTL Calibration status Read Error from
EEPROM
/
Printer Calibration Data Read Error
/
No test available to print
/
Tymp/Reflex
Processor not responding to a command from
the Audio Processor or the
Tymp/Reflex
Processor is not
setting the Synch
Stimo line on power up /
No Free Memory available when going to a new test
/
Invalid test type read from memory when trying to display
Print Head initialization failed /
Printer Ambient temperature out of Range
/
Record was received from the
Tymp/Reflex
Processor which
has a valid format but the record type was not the type
expected
/
Call Factory for instruction
Audiometry mode not enabled
To Next Page
Loading...
