Welch Allyn PanOptic 118 Series - Lamp Replacement Instructions; Lamp caution and model usage; Remove the lamp from the head base; Insert the new lamp

15
Lamp Replacement Instructions
WARNING: Lamps may be hot. Lamp should be allowed to
cool before removal. Use only Welch Allyn model 03800-U
or 03800-LED lamps with this product.
Caution: Halogen lamps are pressurized to provide
maximum efficiency and illumination. Mistreatment may
cause shattering. Protect lamp surface against abrasion and
scratches. Verify power is off when replacing lamp. Dispose
of lamp with care.
ALIGN TAB
Use your fingernail or a
small prying instrument
to remove the lamp from
the ophthalmoscope
head base.
To insert the new lamp,
align tab on lamp with
notch in the base of the
ophthalmoscope head
and push inward until
firmly seated.