Welch Allyn PanOptic 118 Series - Turn the scope on and adjust light intensity; Position for examination; Instruct patient to look straight ahead; Begin from 6 inches away

8
5. Turn the scope on (using any
Welch Allyn 3.5V power
source). Adjust light intensity
rheostat to maximum position.
You are now ready to begin the examination:
6. Examiner should be positioned
approximately 15 degrees to the
temporal side of the patient.
7. Instruct the patient to look
straight ahead at a distant
object.
8. Begin from about 6 inches away,
looking through the scope and
shining the light at the patient’s
eye while looking for the red
retinal reflex.
9. Rest your left hand on the
patient’s forehead. (optional)