Welch Allyn PanOptic 118 Series - Cannot obtain sharp focus;hazy view; Dim Light Output; Glare in view; Cannot attach to power handle

18
Can not obtain
sharp focus/hazy
view.
The lenses are
dirty.
Clean the lenses
with the provided
cleaning cloth.
Dim Light Output
Lamp pin not
engaged in slot
Insert the lamp
with pin firmly
seated in slot.
Film on Optics Clean the lenses
with the provided
cleaning cloth.
The handle is not
fully charged.
Charge the handle,
check the battery
and/or the charger
Glare in view Fingerprints or
dirt on the
objective (Patient’s
Side) lens
Clean the objective
(Patient’s Side)
lens with the
provided cleaning
cloth.
Cannot attach to
power handle.
Lamp is not fully
inserted.
Insert the lamp
with pin firmly
seated in slot.
Trouble Area Possible Cause
Corrective
Action