Welch Allyn RetinaVue 700 - Performing Exams and Data Management; Image Acquisition and Quality Assessment

Acquire images
1. To proceed with the default Exam protocol, touch START.
a. (Optional) If creating the exam on the camera, touch (Settings)
or touch within the currently displayed exam protocol
2W
R L
to
launch the Exam protocol selection dialog box and to select the
desired Exam protocol. Select the new protocol at the dialog screen
prompt: "Which type of eye exam do you want to capture?"
Touch OK.
2. Approach the patient from directly in front of the examined eyes and firmly
press the facecup of the RetinaVue 700 Imager against the patient's forehead
and nose. A message appears on the LCD touchscreen: "Get ready to aim and
center camera" as the camera is entering the live preview mode.
Directions for use First time set up of the RetinaVue 700 Imager 23