Welch Allyn Schiller SP-1 - Procedure Overview

Procedure Overview
f -
■ >
1
Switch ON
2
Make Settings preference if required (remembered when unit switched off)
3
Insert new screen/filter or sensor
4
Calibrate Unit
5
Enter patient data
6
Select test
7
Press START
8
Patient Makes test
9
Press STOP
10
Repeat as many times as required {Best, or best two + last printed)
11 Display result
12 Print Result
Send result if required
>•.__,___.—,_—
j
Page 3
SP~1
User's Guide