Welch Allyn Schiller SP-1 - Patent Data

Menu Overview
Main Menu
Save
This option only appears when the memory option is installed. Select this
option to save the current measurement in the memory.
Memory
This option only appears when the memory option is installed. Select the
memory menu item to:
Print a stored recording
Delete a recording
. Send a recording
MTA Ident
Enter the name of the person carrying out the test. The MTA name (medical
technical Assistant) is given on printouts. The users name entered here, is
remembered when the unit is switched off: it only needs updating when a new
user takes over.
Send
Current recording is sent over the RS-232 interface (for example to the SEMA
PC storage program). Note that the RS-232 protocol settings must be defined
in the setup menu before transmission.
Setup
See System Setup Menu following
Page 10
SP-1
User 's Guide