Welch Allyn Schiller SP-1 - Tagging a Stored File; Exiting the Memory Option

Memory Management
—
With a file highlighted, press the MENU key to display the following options:
Read Highlight this option and press ENTER to display the patient data of the
selected file. Obtain a printout of the selected file by pressing the PRINT key.
Display results by pressing the RESULT key.
Delete Highlight this option and press ENTER to delete all or selected files. When this
option is selected you are pro mpted by the message TAGG ED or ALL, Select
the option you require to delete only the tagged files or all stored files.
Send Highlight this option and press ENTER to send all or selected files over the RS-
232 interface. When this option is selected you are prompted by the message
TAGGED or ALL, Select the option you require to send only the tagged files
or all stored flies. See the following page for sending procedure.
To cancel any operation in the above option press the MENU key.
Tagging a Stored File (for Deletion or Sending)
Highlight the File (with the READ/DELETE/SEND menu NOT displayed - if the menu is
displayed, exit by pressing the MENU key) and press ENTER, An asterisk appears by the
side of the file. Cancel the tag by pressing ENTER again.
Exiting the Memory Option
Press any of the Function keys {FVC, SVC, MW, or MV) to return to the measurement
screen. Note that it is not possible to exit the memory screen when the Delete or Send menu
options am selected (Tagged/Ail displayed); press the MENU key first then and then the
s _ function key . ______
8P-1
Users Guide
_ )
Page 41