Welch Allyn Schiller SP-1 - Routine Care and Maintenance

Care & Maintenance
The casing of the SP-1 should be cleaned with a soft cloth on the surface only. Disconnect
the unit before cleaning.
WARNING
DO NOT, UNDER ANY CIRCUMSTANCES, IMMERSE THE APPARATUS INTO A
CLEANING LIQUID OR STERILIZE WITH HOT WATER, STEAM, OR AIR. _
Self-test
At the time of print his function was not fully defined
A table giving information for the sen/ice staff is printed out.
Maintenance
At 12 monthly intervals, the unit should undergo a technical safety check. The extent of this
check should include the following:
• Visual inspection of the unit, sensor and cables.
• Electrical safety tests according to I EC 601 -1.
• Functional tests according to the Service Handbook.
The test results must be documented.
SP-1
User's Guide