The Add Printers screen appears.
4. If you do not see the printer you want to add, touch Refresh.
The list of printers may take a moment to update.
5. Select the printer.
If you do not see the printer on the Add Printer screen, see To add the printer
manually.
6. Touch Save.
The printer is automatically set as the default printer.
7. If the Save icon does not appear, see To add a print driver manually.
8. To verify that the printer is installed correctly, touch Print test page.
9. If the test page does not print correctly, refer to the Troubleshooting section.
To select a print driver manually
Most printers can be added by selecting them from the Add Printers screen and saving
them. If you can select a printer but not save it, you need to select a print driver. If you
do not see the printer on the Add Printer screen, you need to add the printer manually.
1. If adding a USB printer, connect the USB cable from the printer to the vision
screener’s USB port. If adding a network-connected wireless printer, make sure the
vision screener has been added to the wireless network.
2. Touch Tools, and then touch Printer.
The Available Printers screen displays all the printers that have been saved on the
vision screener.
3. Touch Plus.
The Add Printers screen appears.
4. If you do not see the printer you want to add, touch Refresh.
The list of printers may take a moment to update.
5. Select the printer.
If you do not see the printer on the Add Printer screen, see To add the printer
manually.
6. Touch Next
7. Touch the Driver field and select the driver.
8. Touch Save.
The printer is automatically set as the default printer.
9. To verify that the printer is installed correctly, touch Print test page.
10. Touch X to return to the previous screen.
28 Advanced settings on the vision screener Welch Allyn® Spot™ Vision Screener Model VS100
To Next Page
Loading...
