Before adding a printer manually
If you need to add a printer manually, consult your local system administrator for the
following information about the printer location.
Field Description Requirements
Protocol
IPP or Raw Socket The default value is IPP.
Hostname/IP
address
Hostname The maximum length is 40 characters.
Allowed characters include a blank space as well as the following:
A through Z a through z
0 through 9 -
. ~
General delimiters
: / #
? [ ] @
Subnet delimiters
! $ &
' ( )
* + , ;
IP Address An IP address consists of numbers between 0 and 9 in the format xxx.xxx.xxx.xxx.
For example, 192.123.100.001.
Port
Port numbers range
from 0 to 65535.
IPP The default port is 631.
Raw Socket
The default port is 9100.
Resource Path
Available when IPP
is the selected
protocol.
The maximum length is 40 characters. For allowed characters, see Hostname. The
default value is ipp/print.
To add a printer manually
If the vision screener cannot discover a printer, you must add it manually. The printer
does not need to be connected to the wireless network when you add it to the vision
screener. The vision screener will print to the printer when it is connected.
1.
Touch Tools, and then touch Printer.
The Available Printers screen appears.
Directions for use Advanced settings on the vision screener 29
To Next Page
Loading...
