Welch Allyn Tycos - Tools and Equipment

Welch Allyn Inc. Aneroid Sphygmomanometers Service Manual
Revision A
Welch Allyn Inc. Page 5 of 40
1.2 Tools and Equipment
The following is a list of the tools and equipment that is required to do
the repair and calibration of the aneroid gauges.
Tool Number Description
T106845A Calibration Tool
T105243A Pointer Removal Tool
T105243B Pointer Removal Tool
T107345 Span Wrench
T110657 Calibration Dial Adapter, Economy
T105721 Calibration Dial, Pocket and Hand Gauge
T112663 Calibration Dial, Walls and Mobiles
T106763 Calibration Stand (Wall Aneroid)
T112592 Calibration Dial (Silver Ring)
T105258 Wrench (Economy)
T108913 3/8” Open End Wrench
T108897 Movement Removal Wrench
T113265 Thumbscrew Wrench
T110543 Pliers to Grip Lure
T105644 Collet
T55804-1 Pocket Screw Cap Assembly
T108212 Economy Fixture
T107569 Hand Fixture
T74555 Pocket Fixture
T112655 Top Plate Wrench
T113249 Screw Cap Removal Tool
T112927 5/16” Open End Wrench
T112765 ¼” Open End Wrench
T34938 Pointer Block
T112511B Tweezers
T112726 Jewelers Screw Driver
T112595 Calibration Tool (Silver Ring)
“Disytest” Calibration Dial for Pro Check (Order From S+K)
T112833 Movement Removal Tool (S+K Movement)
T112653 Torque Wrench (S+K movement)
T112653A Adapter for Torque wrench (S+K Movement)
Test Equipment Description Other Tools Needed but
5088-01 Bulb and Valve
Not Provided By Welch Allyn
T112854 500cc Volume 1. Small Hammer
9585TPK4 “T” Fitting 2. 5/8” Socket
9586TPK4 “Y” Fitting 3. ½” Socket
97P24 Pneumatic Tubing (4ft.) 4. ¾” Open End Wrench
200-2000IN Netech Digital Pressure Meter 5. 9/16” - 24 Thread Tap
“or”
6. ¼” - 40 Thread Tap
2270-01 Setra Digital Pressure Meter. 7. 7/16” - 36 Thread Tap
T111962A Tension Set Tool
T112459 Torque Screwdriver
T112459A Torque bit.