Welch Allyn VSM 6000 series - Service

2. Touch the Network tab.
3. Touch the Server tab.
4. Specify settings.
Setting Action/Description
Obtain server IP information automatically Select this to enable the monitor to automatically
obtain the server IP information via the network.
UDP broadcast port: Touch
and enter
the port number that is used to automatically obtain
server IP information. The range of entry is 0 to
65535.
IP Address Touch and enter the IP address of the server
that is used for patient data communication. The
range of entry for each field is 0 to 255.
Port Touch and enter the port number associated
with the server IP address. The range of entry is 0
to 65535.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Service
See the Welch Allyn Vital Signs Monitor 6000 Series Service Manual (103500) for service-related
advanced settings.
120
Advanced settings Welch Allyn Vital Signs Monitor 6000 Series™