Buttons
The buttons on the right side of the frame enable you to do different tasks depending on the profile
you are using. The availability of functions depends on which profile is selected. See the Profiles
section for more information.
Button name Button image Description
Start/Stop
The appearance and function of this button dynamically changes.
Touch to start a manual measurement or a cycle
of automatic measurements.
Touch to stop a measurement that is in progress.
Interval
This button shows the status of automatic measurements.
Touch the button to display the Intervals tab, where you can configure automatic
measurements.
Automatic measurements are off.
Automatic measurements are on.
Alarm Limit control This button displays alarm limits and status.
Touch the button to display the Alarms tab.
60
Patient monitoring Welch Allyn Vital Signs Monitor 6000 Series™
To Next Page
Loading...
