Change the battery
Before removing the battery, shut down the monitor.
1. Turn the monitor upside down to access the battery cover.
2. Locate the battery cover, indicated by .
3. Insert a coin into the slot and push to open. Choose a coin that fits comfortably in the slot.
4. Pull the battery out by pulling the battery label, which is visible when you open the battery
cover.
5. Slide in the new battery. Ensure that you insert the new battery in the same orientation as the
old battery.
6. Replace the battery cover by positioning the end below and then pressing firmly on the
opposite end.
Directions for use Maintenance and service 89
To Next Page
Loading...
