Need help?Do you have a question about the WeldKing TIG 200P AC/DC and is the answer not in the manual?
General| Welding Process | TIG, Stick |
|---|---|
| Input Voltage | 220V ±15% |
| Input Frequency | 50/60Hz |
| Output Current Range | 10-200A |
| Protection Class | IP21S |
| Insulation Class | F |
| TIG Welding Thickness | 0.5 - 6.0 mm |
| AC/DC | Yes |
| Pulse Function | Yes |
| HF Start | Yes |
| Duty Cycle | 60% at 200A |
| Stick Welding Thickness | 1.5-6mm |
Explains the meaning of warning symbols used in the manual.
Details potential dangers and safety precautions during arc welding.
Lists standards and references for welding safety.
Provides information on electromagnetic fields and welding.
Details specifications for the welding machine and TIG torch.
Illustrates the proper connection setup for the welding equipment.
Step-by-step instructions for installing the welding machine.
Information and recommendations for electrical connections and service.
Identifies and explains the controls and indicators on the front panel.
Details the connection and function of the remote control receptacle.
Instructions on how to operate the welding machine.
Provides recommended settings for various welding parameters.
Outlines routine checks and periodic maintenance for the machine.
Safety guidelines to follow during maintenance procedures.
To Next Page