EasyManua.ls Logo

Well SENSE - Operation and Maintenance; 433 MHz Reception and Interference; Positioning Methods; Precautions and Safety

Well SENSE
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
433 MHz RECEPTION CHECK
The transmission range is about 260feet (80meters) from the transmitter to the thermometer (in open
area). The thermometer should receive the temperature data with 3 minutes after set-up. If the
temperature data is not received 3 minutes after setting up, please check
1. The distance of thermometer or transmitter should be at least 5~6.5 feet (1.5~2 meters) away from
any interfering sources such as computer monitors or TV sets.
2. Avoid positioning the thermometer onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the same signal
frequency.
4. Neighbors sing electrical devices operating on the same signal frequency can also cause interference.
POSITIONED METHOD
The thermometer can be positioned in 2 ways as desired.
A. Pull out the table stand brackets from the rear of the thermometer, place on table or desk as desired.
B. Hang on the wall by hanging hole.
PRECAUTIONS
Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary,
clean it with a soft cloth.
Never immerse the product in water. This can cause electrical shock and damage the product.
Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different types.
Do not mix alkaline, standard or rechargeable batteries with this product.
Remove the batteries if storing this product for a long period of time.
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for
special treatment is necessary.
Waste electrical and electronic equipment are a special waste category,
collection, storage, transport, treatment and recycling are important because
they can avoid environmental pollution and are harmful to health. Submitting
waste electrical and electronic equipment to special collection centers makes
the waste to be recycled properly and protecting the environment. Do not
forget! Each electric appliance that arrives at the landfill, the field, pollutes the
environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
sales@vitacom.ro, www.vitacom.ro

Related product manuals