Need help?Do you have a question about the Well Transformer Series and is the answer not in the manual?
Details the output sockets, power switch, and indicator LEDs on the front panel.
Check appliance wattage against converter capacity and ensure appliances are off before connecting.
Connect the converter to the main power source using the rear IEC cable.
Press power switch to "RESET", wait for GREEN LED, then switch on appliances one by one.
Do not exceed maximum power rating; consider starting power for motor appliances.
Converter does not change frequency; check device compatibility before use.
Keep converter in a well-ventilated area, away from heat, moisture, children, and flammable substances.
Explains what happens when the circuit breaker trips due to overload and how to reset it.
Explains the meaning of the red LED for high/low voltage and overheat protection.
Details the output sockets, power switch, and indicator LEDs on the front panel.
Check appliance wattage against converter capacity and ensure appliances are off before connecting.
Connect the converter to the main power source using the rear IEC cable.
Press power switch to "RESET", wait for GREEN LED, then switch on appliances one by one.
Do not exceed maximum power rating; consider starting power for motor appliances.
Converter does not change frequency; check device compatibility before use.
Keep converter in a well-ventilated area, away from heat, moisture, children, and flammable substances.
Explains what happens when the circuit breaker trips due to overload and how to reset it.
Explains the meaning of the red LED for high/low voltage and overheat protection.
General| Brand | Well |
|---|---|
| Model | Transformer Series |
| Category | Media Converter |
| Language | English |
To Next Page