wellness saunas 2-3 Person Sauna User Manual (English)

Questions and Answers:

L
Lisa SchwartzJul 29, 2025
What to do if the infrared heater of my wellness saunas 2-3 Person Sauna Plumbing Product will not heat up?
- B
  Beth FinleyJul 29, 2025
  If the infrared heater in your Wellness Saunas Plumbing Product isn't heating up, there could be several reasons. It might be that the heater is broken due to excessive use, in which case you should replace it with a new heater of the same specifications. Another possibility is a burned-out fuse, so check or replace the fuse. Lastly, the wiring connection for the heater could be loose or incorrectly connected; check and reconnect it tightly.
T
thomasterryAug 3, 2025
Why is my wellness saunas 2-3 Person Sauna sauna room not maintaining the correct temperature?
- M
  mackenzierobbinsAug 3, 2025
  If your Wellness Saunas Plumbing Product sauna room isn't maintaining the correct temperature, there are a few things to check. The circuit board might not be functioning correctly, so check the power output on it. There may be a problem with the heater. Also, the control panel settings could be incorrect, so power the sauna off and on to reset it. Finally, the temperature sensor wire might be loose or broken, so check its connection and condition.
S
scottdavidsonAug 7, 2025
How to fix the light in my Wellness Saunas Plumbing Product if it's not working?
- K
  Kevin BakerAug 8, 2025
  If the light in your Wellness Saunas Plumbing Product is not working, start by replacing the light bulb, as it may be burned out. Ensure the bulb is secured tightly enough in the base to make good contact in the light fixture. If the issue persists, the socket may be broken and require replacement. Also, there may be problems with electrical control panel, so check or replace the panel.
W
William HernandezAug 13, 2025
What to do if the power indicator light is not on or there is a beeping sound from my wellness saunas 2-3 Person Sauna sauna?
- A
  Angel ChaseAug 13, 2025
  If the power indicator light is not on or you hear a beeping sound coming from your Wellness Saunas Plumbing Product, first check for power to the outlet. Then, check the connection between the power cord and the main control unit. If those are fine, try removing and reinstalling the temperature sensor.
J
Jimmy JohnsonAug 17, 2025
Why is there a burning smell coming from my Wellness Saunas Plumbing Product?
- R
  ryan90Aug 18, 2025
  If you notice a burning smell coming from your Wellness Saunas Plumbing Product, unplug the sauna and check the voltage, as there could be circuit problems causing components in the electrical system to burn.