www.Welltec.pro 23
Before starting the connection, make sure that the phone is connected to a 2.4GHz WiFi
network with an active Internet connection. Have a password for this network ready. Connect
the air conditioner to the power supply, but do not turn it on. With the air conditioner off,
press the „SLEEP” button for 3 seconds until the WiFi LED on the device starts flashing
quickly. The air conditioner will then be ready for connection.
On the main application
screen, select the „+”
button from the right
corner of the screen or the
„Add device” button.
Select „air conditioner”
from the device list.
Make sure the „WiFi” led
on the air conditioner
quickly and select the
„Finish network
configuration” button.
To Next Page
