WELLTEC ACH - Page 7

www.Welltec.pro 5
Remove the device from the
packaging
Remove the tube and the
outlet frame from the device.
Connect the elements of
the outlet frame.
Attach the outlet frame by
orienting it so that the arrow
on the frame points to the
open padlock and then twist it
to secure.
Install the air exhaust pipe.
Expose the pipe to the
outside using a window seal
or window seal.
Connect the air conditioner
to the power supply.
Start the air conditioner by
pressing the „Power” button
on the control panel or the
remote control.