If you have a sliding window, you can install a window kit in it. After installation, connect
the air exhaust pipe with a flat end to the skirting board. The minimum width of the
window is 53 cm, the maximum width is 154 cm.
Both in cooling and heating mode, the air conditioner can be placed outside the room. It
must be placed in the shade and protected from rain and other precipitation.
• In cooling mode, install an air exhaust pipe in the cold air outlet. After that, the pipe
must be installed with a window kit or window seal, bringing cold air into the room. In
cooling mode, the outside temperature should not exceed 35 ℃.
• In heating mode, install an exhaust air pipe on the warm air outlet. After that, the
pipe must be installed with a window kit or window seal, bringing hot air into the
room. In heating mode, the outside temperature should not be lower than 7 ℃.
To Next Page
Loading...
