Wen MSA750 - User Manual

To Next Page

MITER SAW STAND

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease

of operation, and operator safety. When properly cared for, this product will supply you years of rugged,

trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If

you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.

IMPORTANT:

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

techsupport@wenproducts.com

WENPRODUCTS.COM

(M-F 8AM-5PM CST)

Model # MSA750

bit.ly/wenvideo

For replacement parts visit

WENPRODUCTS.COM

NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.

Need help?

Do you have a question about the Wen MSA750 and is the answer not in the manual?

Wen MSA750 Specifications

General

Details roller height adjustment for level workpiece support during normal cutting.

Explains using roller as a stop face for repetitive cuts and height adjustment.

Guides on checking and adjusting the clamping pressure of saw mounting brackets.

Step-by-step instructions for securely attaching a miter saw to the stand.

Instructions for mounting miter saws with unique configurations using an adaptor plate.