6
SPECIFIC RULES FOR YOUR WORK BENCH
WORK BENCH USE & CARE
1. For maximum stability, assemble and use the work
bench only on flat, level surfaces.
2. Do not modify or use the tool to do a job for which it
was not designed. Unauthorized modification may dam-
age the tool and / or cause personal injuries.
3. Do not exceed the rated weight capacity of 220 pounds.
Make sure the weight is evenly distributed. Be aware of
dynamic loading, as sudden movement may briefly cre-
ate excess load, causing product to fail.
4. Do not step, climb, or sit on the work bench.
6. Always check for damaged or worn out parts before
using the tool. Check for alignment of moving parts,
jamming, breakage, improper mounting, or any other
conditions that may affect the tool’s operation. Any part
that is damaged should be properly repaired or replaced
before use.
7. Maintain tools properly. Always keep tools clean and
in good working order. Store the unit in a dry, secure
place out of the reach of children. Inspect the tool for
good working condition prior to storage and before re-
use.
Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool”
in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
To Next Page
Loading...
Need help?
General
