Need help?Do you have a question about the Westermo ADSL-350 and is the answer not in the manual?
General| Model | ADSL-350 |
|---|---|
| Maximum Downstream Data Rate | 24 Mbps |
| Maximum Upstream Data Rate | 1 Mbps |
| Approvals | CE, FCC, UL |
| Type | ADSL Router |
| WAN Interface | ADSL2+ |
| LAN Interface | 4 x 10/100 Mbps Ethernet |
| ADSL Standards | ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.992.3 (ADSL2), ITU G.992.5 (ADSL2+) |
| Power Supply | 12 VDC |
| Power Consumption | 5 W |
| Protocols | TCP/IP, UDP, ICMP, DHCP, NAT, PPPoE, SNMP, HTTP, HTTPS, SSH, TFTP |
| Management | SNMP |
Safety guidelines before installing the unit.
Precautions for handling the unit safely.
Guidelines for maintaining the unit's performance and warranty.
Visual representation of the unit's physical dimensions.
Detailed specifications for the unit's power interface.
Detailed specifications for the RS-232 serial interface.
Detailed specifications for the Ethernet TX interface.
Lists ADSL standards and their annexes supported by the unit.
Pinout and description for Ethernet RJ-45 connectors.
Pinout and description for the DCE female serial port.
Details of the power connector and its terminals.
Explains the status indicator (STS) LED functionality and states.
Explains the power indicator (PWR) LED functionality and states.
Explains the signal (SIG) LED for ADSL connection status.
Instructions for resetting the unit to factory default settings.
Lists supported Ethernet standards and protocols.
Lists supported ADSL standards and technologies.
Lists supported serial port technologies.
Details on routing, firewall, and VPN capabilities.
Lists management tools and features like Web-interface and CLI.
Default IP address, Netmask, Username, and Password for access.
Requirements and precautions for the unit's power supply.
A guide to setting up the ADSL connection via the web interface.
Instructions to access the unit's web interface using its IP address.
Details on the login screen prompts for username and password.
Description of the status page displayed after successful login.
Guide to finding necessary ADSL connection parameters from providers.
Configuration steps for connection type and encapsulation settings.
Configuration steps for PPP settings based on connection type.
Instructions to change the unit's default administrator password for security.
Steps to enable and configure the unit as a DHCP server for LAN clients.
Using Dynamic DNS (DDNS) to manage changing ADSL IP addresses.
Guide to enabling internet access for unit configuration via firewall rules.
Instructions on port forwarding and firewall rules for LAN/Serial devices.
Recommendations for optimal cooling and ventilation for the router.
To Next Page
